 |
|
Description of CTP Plate |
Plate
type |
IR-sensitive, Positive-working, Thermal
CTP Plate |
Substrate
|
Electromechanically grained and anodized
lithographic aluminum. |
available
Gauge & sizes |
0.15, 0.25, 0.30, 0.4mm: maximum
width 1,200 mm. |
Alloy
|
Standard 1050 alloy |
Spectral
Sensitivity |
800-850 nm: peaks 830 nm |
Digital
Energy |
150-200 mj/㎠ |
Length
of Run |
Unbaked: Approximately 150,000 copies
of impression
Baked: Normally over 1,000,000 copies of impression
Varies depending upon printing conditions like press,
ink, paper and so on. |
Resolution
|
1-99% & 250 dpi |
Image
Color |
Dark blue (unbaked) |
Process
|
1. Develop
2. Rinse/Finish (or apply prebaking solution) |
Processing
Equipment |
DTOP automatic plate processor is
recommended. |
Replenishment
Rate |
10 square meters/liter, Ready to use |
Processing
Chemistry |
DTOP CTP developer is recommended
: Original liquid without dilution (HARMONY). |
Development
Condition |
Temperature: 25 ± 2 degrees / Time:
30 ± 10 Seconds |
Finisher
|
DTOP gum solution is recommended.
|
Safelight
|
Daylight working |
Shelf
Life |
12 months when stored in a dark, cool
and dry space. |
